Vibrating Feeder

【Max feeding size】:  ≤1200mm

【Capacity】:    ≤1500t/h

【Application】:    mining, metallurgy, coal and chemical industries.

【Raw materials】: mine, ore, construction waste, mine tailing

Products features of Vibrating Feeders:

1. The track is linear motion, smooth vibrating.

2. Adopt the double eccentric shaft exciter, it ensure that equipment can withstand the impact of falling bulk materials, large feeding capacity.

3. Uniform and continuous feeding material, preventing the crash phenomenon arising due to uneven feed, prolongs equipment life.

4. It has steel structure and grate bar structure, steel structure used for sand production line.

5. The feeder with grate bar structure can coarse screen the material. Special fence can prevent the raw material from blocking. The distance between fences is adjustable.

6. Reliable work, low power consumption, long service life, easy maintenance, easy adjusting and excellent performance.

Working principle of Vibrating Feeders:

ZSW Vibrating Feeders made up of frame, exciter, spring support, gear devices, etc. The vibrator is the source of vibrating feeding, the vibrator includes two eccentric shafts (active and passive) and a gear pair, driven by the motor, with active shafts and passive shafts meshed and reverse rotation made by both of them, frame vibrating makes the materials continuously flow forward and achieves the delivery.

GZS series Vibrating Feeders are single plastid forced vibration system, the vibration source is two sets vibrating motor, vibration motor do synchronizing reverse operation, between two vibrating motors without compulsion links. The vibration produced in the reverse direction between the rotors, and the centrifugal force produced by the synchronous operated eccentric block. During the each instantaneous position of the eccentric block’s rotation, the resultant force of centrifugal force along the throw direction is always superposed each other, but the component force in its normal direction is always cancel each other, so to form a single exciting force along to the throw direction. Under this force, the materials in the vibrating feeder to make a continuous oblique and up throwing motion, so as to achieve the purpose of feeding.

The vibration source of ZGS series Vibrating Feeders is controlled by the frequency converter to control the two motors through the universal coupling to drive the eccentric block on the main shaft of the vibrator to do synchronous and reverse operation. Eccentric block running and the horizontal plane of the material form a certain Angle to throw, to achieve the purpose of feeding.