Hammer Sand Making Machine
【Max feeding size】: ＜30mm
【Capacity】: 180-250t/h
【Application】: it mainly applies to crushing the materials which comprehensive strength is below 250MPa, such as limestone, salt, coal and gypsum.
Configurations of Hammer Sand Making Machine:
The machine is mainly composed of body, double rotor, sieve plate, lining plate and hydraulic opening part. The rotor part is mainly composed of spindle, disk, hammer head, hammer shaft, disk guard plate and so on.
Working principle of PC hammer crusher:
The machine is mainly composed of body, double rotor, sieve plate, lining plate and hydraulic opening part. four motors drive the main shaft of the host through the triangle belt rotation, so that the rotor disk drives the hammer to run at a high speed, the material into the body by the hammer's violent impact in the crushing chamber impact each other and broken, when the material particle size is less than the sieve plate hole, the material by centrifugal force and gravity out of the sieve plate hole.
The body of this machine is welded with steel plate. The body is divided into three parts: upper body 1, upper body 2 and lower body. The front upper body is equipped with a small door to check the wear condition in the body and observe the clearance adjustment.
